Need help?Do you have a question about the DINGLI BA20ERT and is the answer not in the manual?
General| Platform Capacity | 230 kg |
|---|---|
| Weight | 11, 800 kg |
| Turning Radius | 5.3 m |
| Drive Speed | 6.1 km/h |
| Gradeability | 45% |
| Maximum Working Height | 20 m |
| Working Height Max | 20 m |
| Platform Height Max | 20 m |
General safety practices for major areas of machine usage.
Explanation of safety alert symbols and signal words used in the manual.
Precautions for safe operation, including operator training and workplace inspection.
Ensures operators are trained and knowledgeable about machine operation and safety.
Safety measures to avoid hazards in the work area prior to machine operation.
Procedures for inspecting machine and safety devices before operation.
Guidelines for safe machine operation, including general precautions.
Precautions to prevent trip and fall hazards, including proper harness use.
Guidelines for avoiding electrocution hazards and maintaining safe distances from electrical lines.
Precautions to prevent tipping hazards, including proper surface and grade operation.
Safety measures to avoid crushing and collision hazards during operation.
Procedures for safely towing, lifting, and hauling the machine.
Procedures for preparing, inspecting, and maintaining the machine for operation.
Overview of machine controls and indicators for safe operation.
Explanation of controls and indicators on the ground control panel.
Explanation of controls and indicators on the platform control console.
Information about the tilt sensor and warnings related to machine tilt.
Instructions for safe traveling and driving of the machine.
Instructions for raising, lowering, and telescoping the boom.
Instructions and warnings for towing the machine, including maximum speed and grade.
Details on emergency controls like stop switches and their locations.
Information on the red mushroom-shaped emergency stop switches and their function.
Procedures for operating the machine in emergency situations.
Procedures when the operator is pinned, trapped, or unable to control the machine.
Actions to take if the platform or boom becomes jammed in overhead structures.
Checking and calibrating the overload sensor and maintaining boom sliding blocks.
To Next Page
