浙 江 鼎 力 机 械 股 份 有 限 公 司
Zhejiang Dingli Machinery Co.,Ltd
邮箱/Mailbox：service@cndingli.com网址/Website：www.cndingli.com
32/48
正确输入密码后，可进入如下界面；(If you input the password correctly, it will enter into
the following interface)
注意：进入该界面需要经过培训的人员才能操作，因为不正确的设定，会导致系统没有任
何动作。
(Waring: If you want to enter into the interface, you must be a trained and qualified
personnel. Because if your setting is wrong, the system will be no any operation)
A 小臂角度校验，用于小臂的上下限位和称重功能；(Jib Angle, for jib upper and lower
position, load function)
B 小臂压力校验，用于称重功能；(Jib pressure, for the load function)
C 车轮的转向校验，用于转向时的限制和减速转向功能; (Steer wheeling, for the limit of
the wheeling steer and the speed cut function)
3.4.3.1 小臂角度校验(Jib angle verify)
正向角度校验
(Forward direction angle verify)
反向角度校验
(Reverse direction angle verify)
在进行角度校验时，需要带数显的水平尺肯定到小臂的臂架上，便于在任何位置能读出实
际角度值。(When you verify the angle, you need a levelling instrument which can read
out the digital. In order to read out the angle value, you need put the levelling instrument
on the jib)
To Next Page
Loading...
