浙 江 鼎 力 机 械 股 份 有 限 公 司
Zhejiang Dingli Machinery Co.,Ltd
邮箱/Mailbox：service@cndingli.com网址/Website：www.cndingli.com
38/48
1.行走速度设定，用于调整套筒车前进后退速度及手柄使能的动作斜坡；(Travelling speed
setting,it is used to adust the forward and backward speed and the joystick start/ stop
slope)
2.转向速度设定，用于调整套筒车车轮转向速度；(Steering speed setting,it is used to
adust the wheel steering speed)
3.桅柱起升速度设定，用于调整套筒车垂直桅柱起升速度；(Mast lift up speed setting,it is
used to adust the vertical mast lifting up speed)
4.桅柱回转速度设定，用于调整套筒车垂直桅柱左右回转速度；(Mast rotation speed
setting,it is used to adust the vertical mast left and right slewing speed)
5.小臂起升速度设定，用于调整套筒车小臂起升速度；(Jib lift up speed setting,it is used to
adust the jib lifting up speed)
3.4.5.1 行走速度设定 Travelling speed setting,i
前进速度设定 Forward speed setting
界面中“Forward speed”显示目前套筒车前进速度的设定；设定范围为 1000 到 4400；(The
“Forward speed” in the interface show the machine forward speed setting now; the range
is 1000 to 4400)
代表每按一次，以 50 的步长递加，并且保存；( stands for you press it once,
the speed will increase 50 and it will save automatically)
To Next Page
Loading...
