浙 江 鼎 力 机 械 股 份 有 限 公 司
Zhejiang Dingli Machinery Co.,Ltd
邮箱/Mailbox：service@cndingli.com网址/Website：www.cndingli.com
41/48
(The “B Stop slope” in the interface show the machine backward stop slope setting now;
the range is 0 to 100)
代表每按一次，以 1 的步长递加，并且保存；( stands for you press it once,
the slope will increase 1 and it will save automatically)
代表每按一次，以 1 的步长递减，并且保存；( stands for you press it once,
the slope will decrease 1 and it will save automatically)
3.4.5.6 车轮转向速度设定(Steer speed setting)
界面中“Steer speed”显示目前套筒车车轮转向速度的设定；设定范围为 500 到 2000；
(The “Steer speed” in the interface show the machine wheel steering speed setting now;
the range is 500 to 2000)
代表每按一次，以 10 的步长递加，并且保存；( stands for you press it once,
the speed will increase 10 and it will save automatically)
代表每按一次，以 10 的步长递减，并且保存；( stands for you press it once,
the speed will decrease 10 and it will save automatically)
3.4.5.7 桅柱举升速度设定(Mast lift up speed setting)
界面中“Mast up speed”显示目前套筒车桅柱举升速度的设定；设定范围为 1000 到 4400；
(The “Mast up speed” in the interface show the machine mast lift up speed setting now;
the range is 1000 to 4400)
代表每按一次，以 100 的步长递加，并且保存；( stands for you press it once,
the speed will increase 100 and it will save automatically)
To Next Page
Loading...
