浙 江 鼎 力 机 械 股 份 有 限 公 司
Zhejiang Dingli Machinery Co.,Ltd
邮箱/Mailbox：service@cndingli.com网址/Website：www.cndingli.com
5/48
3.刹车释放(Brake release)
3.1 用楔子垫住车轮，以防止机器滚动。
(Chock the wheels to prevent the machine from rolling.)
3.2 将地面和平台控制器上的红色“紧急停机”按钮均拉出到“开”位置。
(Pull out the red Emergency Stop button on both the ground and platform controls to the
on position.)
3.3 打开钥匙开关选择地面控制，按住桅柱上升按钮和小臂上升按钮5秒以上，待等到蜂鸣
器发出 嘀 嘀的响声后；显示器出现W28和W41循环提示。刹车已经释放。如果你想关掉刹
车释放，只需关掉下控的钥匙开关。
（Turn on the keyswitch to Ground control position, press and hold the mast lift button
and Jib lift button more than 5s until the beeper is working, the brake is released when
W28 and W41 is displayed alternately. If you want to close the brake release, just turn off
the key switch）
3.4 将地面和平台控制器上的红色“紧急停机”按钮均推到“关”位置。
(Push the red Emergency stop button on both the ground and platform controls to the off
position.)
To Next Page
Loading...
