OPERATOR’S MANUAL with Maintenance Information
Control Panel
15
Ground Control Panel
1LED
Diagnostic readout
2 Idle select button
Press this button to select the engine idle
setting. Light on indicates high idle is
selected. Light off indicates low idle is
selected.
3 Overload indicator light
Light on indicates when overloaded.
4 Engine start/flameout button
Press this button to start/flameout the
engine.
5 Engine RPM display button
Press this button to show the engine
RPM.
6 Hour meter
The hour meter displays the number of
hours the machine has operated.
7 Key switch for platform / off / ground Turn
the key switch to the platform position and
the platform controls will operate.
Turn the key switch to the off position and
the machine will be off. Turn the key
switch to the base position and the ground
controls will operate.
8 Red Emergency Stop button
Push in the red Emergency Stop button to
the off position to stop all functions. Turn
the red Emergency Stop button clockwise
to the on position to operate the machine.
9 Platform down button
Press this button and the platform will
lower
10 Lift function enable button
Press this button to activate the lift
function.
11 Standby
12 Platform up button
13 Standby
To Next Page
Loading...
