Need help?Do you have a question about the Dini Argeo DGT1SP and is the answer not in the manual?
General| Brand | Dini Argeo |
|---|---|
| Model | DGT1SP |
| Category | Transmitter |
| Language | English |
Conditions for correct installation of the transmitter and load receiver.
Guidelines for electrical safety and installation practices.
Procedures for proper earthing of the transmitter, load cells, and structure.
Wiring schematic for the standard DGT1SP model.
Wiring schematic for the DGT1SP-AN model with analog output.
Wiring schematic for the DGT1SP-PB model with Profibus.
Wiring schematics for Ethernet and Fieldbus models.
Wiring schematic for the DGT1SP-CANOP model with CANopen.
Wiring schematic for the DGT1SP-DEVNET model with DeviceNet.
Procedure to access and use the quick menu for parameter programming.
Steps to enter the advanced menu and save configuration changes.
Explanation of key operations within the programming menus.
Graphical representation of the transmitter's menu structure.
Calibrating the transmitter using theoretical values and known weights.
Step-by-step guide for calibrating with applied sample weights.
Entering calibration points manually for known weight values.
Procedure for performing a quick zero adjustment or pre-tare reset.
Procedure for precalibrating the Analog-to-Digital converter.
Adjusting filters and stability detection for optimal performance.
Additional filter to eliminate sudden weight peaks.
Configuring stability detection divisions and time parameters.
Adjusting the transmitter for local gravity acceleration values.
Overview of parameters for resetting and auto-zeroing.
Configuration of zero tracking, time, and restoring zero functionality.
Managing tare modes, semi-automatic, predetermined, clearing, and restoring.
Activating and storing weighing operations in the alibi memory.
Retrieving and clearing data stored in the alibi memory.
Activating the x10 weight display for increased resolution.
Detecting and displaying the maximum weight value over a time interval.
Converting the scale's unit of measurement and entering custom factors.
Step-by-step procedure for calibrating the analog output.
Graphical representations of analog output behavior.
Steps for configuring the instrument's USB port for communication.
Setting transmission modes and communication parameters for the 485 port.
Details on standard and extended string formats for data transmission.
Comprehensive list and description of serial commands for transmitter control.
Serial commands for managing alibi memory data.
Registers for reading gross weight, net weight, and status information.
Registers for sending commands and parameters via Modbus.
Procedures for testing transmitter components and retrieving status.
Checking the status of configured inputs, outputs, and serial ports.
Performing tests and setting analog output parameters.
Configuring output behavior based on weight conditions.
Procedure to reset the transmitter to its default factory configuration.
Setting the internal date and time for the transmitter.
To Next Page
