Dini Argeo DGT4XETHIP User Manual

DGT4X
www.diniargeo.com
QUICK START GUIDE V1 ENGLISH
Digital weight Transmitter with 4 channels

Dini Argeo DGT4XETHIP Specifications

General

Brand	Dini Argeo
Model	DGT4XETHIP
Category	Transmitter
Language	English

Summary

Electrical Scheme Overview

Key Functions in Operation Modes

Device Configuration Menu

Functioning Mode Setup

Configure the operational mode of the transmitter (e.g., DEP.CH, IND.CH).

Scale Capacity and Decimal Point

Set scale capacity, increment, and decimal point for measurements.

Load Cell Calibration

Steps for theoretical and sample weight calibration of load cells.

Functioning Modes

MODE 1 DEP.CH

Digital equalization box mode for connecting and equalizing load cells.

MODE 2 IND.CH

Multi-scale mode for managing up to 4 independent scales.

Scale Capacity and Increment Settings

Setting Maximum Capacity

Define the maximum measurable weight for the scale.

Setting Scale Increment

Theoretical Calibration Procedure

Load Cell Capacity Input

Load Cell Sensitivity Input

Calibration with Sample Weight

Zero Point Acquisition

Sample Weight Acquisition

Load Cell Diagnostics

Programming Error Codes

Modbus Register Map

Registers for DEP.Ch / IND.CH (1 SCALE)

Register map for single scale operation in DEP.CH or IND.CH modes.

Registers for IND.CH (4 SCALES)

Register map for multi-scale operation in IND.CH mode.

Registers for Command Sending

Registers used for sending commands to the transmitter.