Dionex ICS-6000 Installation Instructions
86
Doc. 22181-97001 02/18
7. The Netgear genie dialog box appears, confirming that the network is
recognized. To close the dialog box, tap the close button at the top of the
window. Do not tap the Continue button in the Netgear dialog box.
Connecting the IPC OS
1. Verify that the IPC power is on.
2. On the Windows taskbar, locate the network icon in the system tray (in
the lower-right corner of the startup screen). Tap the icon to display a list
of available networks.
3. Find the router connection name that matches the router name copied
from the bottom of the wireless router, and click the connection.
4. Find the entry for the router SSID, and click the corresponding Connect
automatically option.
5. Click Connect to close the menu.
6. When prompted for a password, enter the router password.
7. The Netgear genie dialog box appears, confirming that the network is
recognized. To close the dialog box, click the close button at the top of the
window. Do not click the Continue button in the Netgear dialog box.
8. Verify the IPC and tablet are communicating
3.11 Connecting the Tablet to the Instrument PC
3.11.1 Installing the ICS-6000 App
Follow the instructions in this section if the tablet that will be used with the
Dionex ICS-6000 is not purchased from Thermo Fisher Scientific.
1. Connect the tablet that will be used with the Dionex ICS-6000 to the
Internet.
2. Use Windows Search on the taskbar (or press Windows Key + S) to find
“Store.”
3. Tap the Store best match link to start the Microsoft Store App.
4. In the Microsoft Store App, tap the magnifying glass icon and enter “ICS-
6000” in the search field.
To Next Page
Loading...