EasyManua.ls Logo

Dionex ICS-6000 User Manual

Default Icon
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ICS-6000 Tablet Installation Instructions
This is an excerpt from the Dionex ICS-6000 Installation manual
Question and Answer IconNeed help?

Do you have a question about the Dionex ICS-6000 and is the answer not in the manual?

Dionex ICS-6000 Specifications

General IconGeneral
CategoryIon Chromatography System
Maximum System Pressure5000 psi (34.5 MPa)
Flow Rate Range0.001 to 10 mL/min
Detection MethodsConductivity
Eluent GenerationRFIC-EG (Reagent-Free Eluent Generation)

Summary

3.9 Installing the Tablet

3.9.1 Getting Started

Initial steps for setting up the tablet, including unpacking kits.

3.9.2 Installing the Tablet Arm/Holder

Steps to attach the tablet mounting arm and holder to the main unit.

3.9.3 Routing the Tablet Power and Ethernet Cables

Guide for connecting and routing power and network cables for the tablet.

3.9.4 Positioning the Tablet

Instructions on how to position the tablet in its holder for optimal viewing.

3.10 Installing a Network for Tablet Access

Notes on Network Configurations

Important considerations before setting up network connections for the tablet.

PC and Tablet Communication Test

Procedures to verify communication between the tablet and the instrument PC.

3.10.1 Installing the Router

Steps for setting up the wireless router for tablet network connectivity.

3.10.2 Installing an Ethernet Instrument PC

Instructions for connecting the instrument PC to the network via Ethernet.

3.10.3 Installing an Ethernet Tablet

Guide to connecting the tablet to the network using an Ethernet cable.

3.10.4 Installing a Wireless Tablet

Steps to connect the tablet to the network wirelessly.

3.11 Connecting the Tablet to the Instrument PC

3.11.1 Installing the ICS-6000 App

Instructions for installing the necessary software application on the tablet.

3.11.2 Installing the ICS-6000 Tablet Setup Utility

Guide to installing the utility for automatic tablet-PC pairing.

3.12 Introduction to Pairing

Prerequisites for Pairing

Requirements that must be met before pairing the tablet and instrument PC.

3.12.1 Automatically Pairing the Tablet and Instrument PC

Step-by-step process for automatically pairing the tablet with the instrument PC.

3.12.2 Manually Pairing the Tablet and Instrument PC

Alternative procedure for pairing the tablet and instrument PC if automatic pairing fails.