3 • System Setup
Doc. 22181-97001 02/18
93
e. Close the System window.
3. Add the instrument PC IP address to the tablet “hosts” file:
a. On the tablet taskbar, tap Start.
b. On the Start menu, tap All Programs > Accessories > Notepad.
c. Tap the Notepad icon and select Run as administrator.
d. Navigate to the C:/Windows/System32/drivers/etc/ folder and open
the “hosts” file (the file has no extension).
e. Press Enter after the end of the last line in the file. On the new line,
type the full IP address, space once, and type the full computer name.
f. In Notepad, tap File and then tap Save As.
g. Under Save as type, tap the *select All Files (*.*) option.
h. Accept “hosts” as the file name.
i. In Notepad, tap Save and then tap Close.
4. Save and copy the pairing certificate:
a. On the Windows taskbar, click Start > All Programs > Accessories
> Command Prompt. The command prompt window appears.
b. Type “mmc.exe”to launch the Microsoft Management Console. The
User Account Control dialog box appears.
c. When prompted whether to allow the console to make changes, click
Yes. The Console1 - [Console Root] window appears.
d. On the File menu, click Add/Remove Snap-in. The Add or Remove
Snap-ins dialog box appears.
e. In the Available snap-ins list box, click Certificates, and then click
Add. The Certificates snap-in dialog box appears.
f. Click Computer account, and then click Next. The Select Computer
dialog box appears.
g. Click Local computer and click Finish.
h. In the Add or Remove Snap-ins dialog box, click OK to create a new
Snap-in.
To Next Page
Loading...