Diono Cambria 2XT - Shoulder Belt Routing and Fastening

diono.com
25
3. Feed the shoulder belt portion of the vehicle seat
belt through the upper belt guide.
IMPORTANT:
• When the shoulder belt is
routed through the upper belt
guide, pull some webbing out of
the retractor. Slowly release it to
make sure the belt property
feeds back into the retractor.
Do this between each use.
• The vehicle shoulder belt should lay over the
shoulder and should NOT be touching the
child’s neck.
4. Fasten vehicle seat belt across child.
The lap portion of the seat belt should rest
within both lower belt guides. Make sure
the vehicle seat belt is not twisted and
lays at across child’s hips, torso and
shoulder. DO NOT lay belt high
over the child’s belly.
SECURING THE CHILD
3
4