30
USING THE SHOULDER BELT GUIDE STRAP
WARNING! When in backless mode, if the vehicle
shoulder belt does not correctly t the child, then the
seat must be used with the shoulder belt guide strap or
with the backrest attached and properly
adjusted to t the child.
1. Remove shoulder belt guide strap from
storage area underneath seat.
2. Position child correctly in seat,
making sure lap and shoulder belts are
positioned properly across child.
3. Attach the RED shoulder belt guide
strap onto the diagonal shoulder belt.
4. Adjust strap to correct length, so that
the RED guide is just
above shoulder.
BACKLESS BOOSTER
To Next Page
Loading...
