Diono Cambria 2XT - Using the Booster Seat as Backless; Backless Booster Mode Setup

diono.com
27
While this booster seat is designed
to oer advanced side-impact
protection with its backrest section
attached, the seat bottom can also
be used alone as a backless booster.
WARNING! Use ONLY the vehicle’s
lap and shoulder belt system
when restraining the child in this
booster seat.
DO NOT use a lap belt only!
WARNING! ONLY use with children whose ears are below
the top of the vehicle seat or headrest.
1. Remove the backrest (see pg19).
2. Attach LATCH/UAS connectors (see pg 20).
3. The booster seat should rest
rmly on vehicle seat
bottom and touching the
vehicle seat back. The
entire seat bottom should
sit at on the vehicle seat.
BACKLESS BOOSTER