diono.ca
19
NOTE: Even with UAS connectors properly attached
and adjusted, child seat will still have movement
against the vehicle seat back and bottom.
IMPORTANT: DO NOT use UAS if installation interferes
with vehicle seat belt.
IMPORTANT: When using booster seat in center seating
position, make sure it is stable and does not rock from
side-to-side, otherwise choose a dierent seating position.
DISENGAGING LOWER ANCHOR INSTALLATION
To release the LATCH connectors,
pull the grey lock button on one
of the LATCH connectors and pull
the seat away from the vehicle
seat. Repeat for the other LATCH
connector.
5. Remove the seat from the vehicle.
To store the UAS connectors, push connectors towards
the seat bottom until they “click” locked into the
storage position.
INSTALLATION
1
To Next Page
Loading...
