Diono Everett NXT - Securing the Child; Positioning and Shoulder Belt Routing

Everett® NXT
22
WARNING! Use ONLY the lap and shoulder belt
system when restraining the child sitting in the
booster seat. DO NOT use lap belt only.
1. Properly position child into
installed seat. The child should
be sitting upright and seated all
the way back in the booster seat.
2. Adjust head support to proper
height: The shoulder belt guide
should be slightly above the
child’s shoulders (at least 2.5 cm).
3. Feed the vehicle shoulder belt
through the shoulder belt guide.
IMPORTANT: The vehicle shoulder
belt MUST route completely through
the shoulder belt guide and not fall o
the child’s shoulder.
IMPORTANT: The vehicle shoulder
belt should lay over the shoulder and should NOT be
touching the child’s neck.
SECURING THE CHILD
1
3
2.5
cm
2.5
cm
2