us.diono.com/installation-videos
1-855-463-4666
46
47
FORWARD FACING
FORWARD FACING
INSTALL USING SHOULDER/LAP BELT WITH
5-POINT HARNESS : 20-65 lbs (9.1-29.5 kg)
1. Unhook and Remove Top Tether from Storage
Location on back of seat.
Look for the Top Tether location 2.
2. Place Car Seat Forward-Facing
in Back Seat of the Vehicle. The
base should sit as flat as possible
on the vehicle seat and must sit
fully on the vehicle seat.
3. Route the Vehicle Seat Belt
Thread the vehicle seat belt
through the forward-facing belt
path (marked with the red label)
and out the other side. Engage and
buckle it. The seat belt should lie as
flat as possible and not be twisted.
4. Loosely Attach Top Tether Strap
Do not tighten. Consult vehicle’s
owner manual for specific location.
To Next Page
Loading...
