1. Use an individual 208-240 VOLT, 20 AMPERE electrical socket.(BKW-
A,BKPW-A,BKW11-A,BKPW11-A: 5 AMPERE)
2. DO NOT block the air-intake panel as blocking may overheat the unit.
3. Use pans 12cm (4.75”) or larger in diameter. Please refer to Page 23 for a
list of suitable and unsuitable pans.
4. DO NOT touch the hot surface of the ceramic plate. NOTE: The induction
range itself does not produce any heat during cooking,
however, the heat from the pan will leave the ceramic surface hot!
5. DO NOT heat empty pots or pans. Heating an empty pan could
automatically activate the overheating protection function and the unit will
shut off. An empty pan can become extremely hot very quickly and cause
injury.
6. Place the induction range on a horizontal surface and at least 4” away
from the wall and other objects for the proper ventilation.
7. DO NOT place any objects or tools in the air-intake panel. Doing so may
cause electrical shock.
8. To protect against electrical shock, DO NOT immerse the unit, the cord or
the plug in or near water or other liquids.
2
INSTRUCTIONS and SAFEGUARDS
To Next Page
Loading...
