What to do if my dipo INDUCTION Hob is not heating the pan?
If your dipo INDUCTION Hob powers on but isn't heating the pan, ensure the pan is suitable for induction ranges and is centered on the top plate. If the issue persists, further assistance may be needed.
What to do if my dipo INDUCTION BKP18-A displays error codes E4 or E6?
If your dipo INDUCTION Hob shows error codes E4 or E6, turn it off, unplug it, and allow it to cool down. Then, plug it back in and try again.
Why my dipo INDUCTION BKP18-A unit stops heating or the output is weakened?
If your dipo INDUCTION Hob stops heating or its output weakens, consider the following: * Check the surrounding temperature. * Check the product's ventilation. * Check that the temperature of the ceramic top plate is above 500 F. * Check that the pan is properly placed. * Check the set timer value. * Check if the 12-hour run time has been exceeded.
What to do if my dipo INDUCTION BKP18-A Hob displays error codes E2, E3, or E7?
If your dipo INDUCTION Hob displays error codes E2, E3, or E7, turn it off and unplug it for one minute. Then, plug it back in and try again.
How to fix a blank display on my dipo INDUCTION Hob?
If the display on your dipo INDUCTION Hob is blank, first, check that the unit is plugged in. Next, verify that voltage is present at the outlet. If the display remains blank after these checks, further assistance may be needed.
What to do if my dipo INDUCTION BKP18-A Hob displays error code E5?
If your dipo INDUCTION Hob displays error code E5, check that the temperature sensor is correctly connected to the product. The "E5" error indicates that the sensor isn't properly connected.
What to do if my dipo INDUCTION BKP18-A displays error codes U or 00?
If your dipo INDUCTION Hob shows error codes U or 00, ensure you are using a valid pan with a flat bottom.
Highlights benefits like energy saving, ease of cleaning, speed, and safety.
Explains warning symbols used in the manual for safety.
Precautions for handling power plugs, cables, and avoiding electric shock.
Instructions on proper placement, environment, and handling to prevent damage or injury.
Guidelines for cleaning the ceramic surface and avoiding hazardous cleaning agents.
Advice on usage duration, pacemakers, and avoiding specific cooking scenarios.
Details on controlling heat levels and warm settings for different models.
Instructions for setting and using the cooking timer.
Explanation of using the temperature mode and related settings.
Steps for cleaning the ceramic top plate, control panel, and stainless steel case.
Solutions for display errors, heating problems, and other operational symptoms.
Provides detailed measurements for cutting openings and controller holes for installation.
Specifies required pan bottom flatness, size, and materials for induction compatibility.
Outlines the terms, duration, and coverage of the product warranty.
Explains how to obtain service and conditions that may void the warranty.
General| Type | Induction hob |
|---|---|
| Number of Cooking Zones | 1 |
| Power Supply | 220-240V, 50/60Hz |
| Material | Glass |
| Safety Features | Overheat protection |
To Next Page
