What to do if my dipo INDUCTION CK118-A is not heating the pan?
If your dipo INDUCTION Hob powers on but isn't heating the pan, ensure the pan is suitable for induction ranges and is centered on the top plate. If the issue persists, further assistance may be needed.
What to do if my dipo INDUCTION Hob displays error codes E4 or E6?
If your dipo INDUCTION Hob shows error codes E4 or E6, turn it off, unplug it, and allow it to cool down. Then, plug it back in and try again.
Why my dipo INDUCTION Hob unit stops heating or the output is weakened?
If your dipo INDUCTION Hob stops heating or its output weakens, consider the following: * Check the surrounding temperature. * Check the product's ventilation. * Check that the temperature of the ceramic top plate is above 500 F. * Check that the pan is properly placed. * Check the set timer value. * Check if the 12-hour run time has been exceeded.
What to do if my dipo INDUCTION Hob displays error codes E2, E3, or E7?
If your dipo INDUCTION Hob displays error codes E2, E3, or E7, turn it off and unplug it for one minute. Then, plug it back in and try again.
How to fix a blank display on my dipo INDUCTION CK118-A Hob?
If the display on your dipo INDUCTION Hob is blank, first, check that the unit is plugged in. Next, verify that voltage is present at the outlet. If the display remains blank after these checks, further assistance may be needed.
What to do if my dipo INDUCTION CK118-A Hob displays error code E5?
If your dipo INDUCTION Hob displays error code E5, check that the temperature sensor is correctly connected to the product. The "E5" error indicates that the sensor isn't properly connected.
What to do if my dipo INDUCTION CK118-A Hob displays error codes U or 00?
If your dipo INDUCTION Hob shows error codes U or 00, ensure you are using a valid pan with a flat bottom.
Explains the meaning of warning and caution symbols and icons used in the manual.
Instructions regarding proper outlet use, handling of power cords, and plugs.
Instructions for operating the BKP-A series, including plug insertion, vessel placement, and heat level control.
Detailed instructions for BK-A series, covering plug-in, vessel placement, operation, and timer function.
Guide for CK-A/2CK-A series, including plugging in, vessel placement, operation, and unit shutdown.
Instructions for TCK-A series, covering plug-in, vessel placement, operation, timer, and temperature mode.
General| Type | Induction Hob |
|---|---|
| Model Number | CK118-A |
| Brand | Dipo |
| Number of Cooking Zones | 1 |
| Control Type | Touch Control |
| Power Supply | 220-240V, 50/60Hz |
| Safety Features | Overheat Protection |
To Next Page
