99
©
2005 Directed Electronics—all rights reserved
grammed to initiate with one to three (1-3) presses of one of the
OEM transmitter buttons. Consult with your dealer to determine the
transmitter button and the number of presses (1-3) that have been
programmed for this sequence. Spaces are provided below for writ-
ing in the button and number of button presses.
OOEEMM ttrraannssmmiitttteerr bbuuttttoonn uusseedd ffoorr RReemmoottee SSttaarrtt//VVaalleett TTaakkee--OOvveerr
sseeqquueennccee_________________________________________________________
_______________________________
NNuummbbeerr ooff pprreesssseess rreeqquuiirreedd ttoo iinniittiiaattee RReemmoottee SSttaarrtt//VVaalleett TTaakkee--
OOvveerr sseeqquueennccee_______________
_______________________________________________________
PPrrooggrraammmmiinngg OOppttiioonnss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some may
require installation labor.
The following is a list of the programmable options, with the fac-
tory settings in
BBoolldd
.
■
1122,,
24, or 60 minute run time. your system can be pro-
grammed to allow the vehicle to run for 12, 24, or 60 minutes
when remote started. Can be set up to minute increments by
your installer.
■ 3, 6, 9, or
1122
minute timer mode run time. Your system can
be programmed to allow the vehicle to run for 3, 6, 9, or 12
minutes when remote started in timer mode. Can be set up to
16 minutes by your installer.
To Next Page
Loading...
Need help?
General
