14
© 2011 Directed Electronics. All rights reserved.
Menu 2 - Convenience
Menu
Item
Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 One-time Bypass
One time
bypass Off
One time
bypass On
2 Nuisance Prevention
On
Off
3 Override Pulse count
1
2 3 4 5
4 Door Trigger Error Chirp
On
Off
5 Ign-controlled Dome light
On
Off
6 OEM Alarm Disarm w/Aux-
Trunk
On
Off
7 OEM Alarm Disarm Output
With Unlock
Before Unlock Remote Start
Only
8 OEM Alarm Disarm Pulses
1
2
9 Aux 1 Output type
Validity
Latch Latch/reset/ign 30 sec. Timed Off (5)/2nd
unlock (6)
10 Aux 1 Linking
No Linking
Link to Arm Link to Disarm Link to Arm/
disarm
Link to Remote
Start only
11 Aux 2 Output Type
Validity
Latch Latch reset/ign 30 sec. Timed Off (5)/2nd
unlock (6)
12 Aux 2 Linking
No Linking
Link to Arm Link to Disarm Link to Arm/
Disarm
Link to Remote
Start only
13 Aux 3 Output Type
Validity
Latch Latch reset/ign 30 sec. Timed Off (5)/2nd
unlock (6)
14 Aux 3 Linking
No Linking
Link to Arm Link to Disarm Link to Arm/
Disarm
Smart Key
Control (Link to
Remote Start
Off)
15 Aux 4 Output Type
Validity
Latch Latch reset/ign 30 sec. Timed Off (5)/2nd
Unlock (6)
16 Aux 4 Linking
No linking
Link to Arm Link to Disarm Link to Arm/
Disarm
Link to Remote
Start Only
17 Aux/Trunk Output type
Validity
Off 2nd unlock
1. One-time Bypass
1. Off: One-Time Bypass is not available
2. On: the One-Time Bypass feature will defeat Passive Arming once and, if Armed by remote control,
will defeat Comfort Closure and Aux outputs linked to Arming
2. Nuisance Prevention
1. On: sensors that trigger excessively will be defeated until they have been stable for more than one
hour
2. Off: sensors will not be defeated if triggered excessively
3. Override Pulse Count
• 1-5: sets the number of presses (1-5) on the Control Button required to override the alarm system
4. Door Trigger error Chirp
1. On: if the door trigger is active when arming, the siren will emit a chirp and a message will be sent
to the 2way remote control as an alert
2. Off: an active door trigger when arming will not create an alert output
5. Ign-controlled Dome light
1. On: the dome light output will activate when the ignition is turned off
2. Off: the dome light output will not activate when the ignition is turned off