Need help?Do you have a question about the Directed Electronics VIPER 5901 and is the answer not in the manual?
General| Type | Car Security System |
|---|---|
| Model | VIPER 5901 |
| Remote Start | Yes |
| Keyless Entry | Yes |
| Range | 1 mile |
| Channels | 5 |
| Alarm | Yes |
| Shock Sensor | Yes |
| Glass Break Sensor | Yes |
| Number of Buttons on Remotes | 5 |
| Display Type | LCD |
| Anti-Theft | Yes |
| Number of Remotes | 2 |
| Starter Kill | Yes |
| LCD Remote | Yes |
| Features | Remote Start, Keyless Entry |
| Compatibility | Most vehicles |
| Security Features | Shock Sensor, Starter Kill |
Details FCC RF exposure compliance for remote controls, requiring 20cm separation from body.
Ensures safe remote start operation for manual transmission vehicles, requiring neutral and parking brake.
Warning against operating the remote start if the vehicle starts in gear, due to risk of damage or injury.
Instructions for completing and returning warranty registration within 10 days of purchase for validity.
General advice on system complexity, authorized installation, and accessing manual copies online.
Information on obtaining additional or replacement remote controls for the system.
Details how the remote indicates when it's out of range and factors affecting transmission.
Explains system requires no specific maintenance; discusses remote battery types and longevity.
Instructions for charging the 2-way remote battery via USB, including indicators and temperature warnings.
Describes how low battery status is indicated on both 1-way and 2-way remotes.
Procedure for replacing the battery in the remote control by accessing the battery holder.
Explains how to operate two cars with the 2-way remote and switch between them.
Diagram and description of the buttons and features of the 2-way Responder LC remote.
Diagram identifying buttons and features of the 1-way LC companion remote.
Table detailing button functions across different levels and press durations for transmitter configuration.
To Next Page
