To Next PageTo Next Page
Need help?Do you have a question about the Directed Electronics Viper 5104 and is the answer not in the manual?
General| Remote Start | Yes |
|---|---|
| Keyless Entry | Yes |
| Alarm | Yes |
| Shock Sensor | Yes |
| Panic Mode | Yes |
| LED Status Indicator | Yes |
| Number of Remotes Included | 2 |
| Remote Range | Up to 1/4 mile |
| Range | 1/4 Mile |
| Starter Kill | Yes |
| Dome Light Supervision | Yes |
| Valet Mode | Yes |
| Type | Security System |
| Security Features | Starter Kill |
| Remote Control | Yes |
Pinout and function details for the 6-pin main harness (H1).
Pinout and function details for the 24-pin H2 harness.
Pinout and function details for the 10-pin H3 remote start harness.
Pinout and function details for the 3-pin door lock connector.
Procedure for adjusting the shock sensor sensitivity.
Process to program the Virtual Tach feature for engine checking.
Steps to learn the tachometer signal for engine RPM detection.
Procedure to test the neutral safety switch for proper remote start operation.
Configures how the system is armed, including passive and auto-arm modes.
Manages panic output activation and audible confirmation signals.
Options for ignition-controlled locks, pulse counts, and durations.
Specifies connection types for hood, door, and trunk switches.
Features for temporary bypass, sensor nuisance reduction, and door trigger alerts.
Configures types and linking for auxiliary outputs.
Configuration for OEM alarm disarm and pulse options.
Linking auxiliary outputs to commands and SmartKey control.
Selects transmission mode and engine checking method (Virtual Tach, Voltage).
Sets starter crank duration and engine runtime for remote start.
Configures turbo mode, timer starts, and diesel start delay settings.
Settings for remote start safelock and other specialized functions.
Configures sensor names, siren duration, and auxiliary timed output settings.
Sets linking for auxiliary channels and diesel start delay timer.
Configures Smart Start thresholds and programming access locks.
Adjusts Virtual Tach crank time and sets remote start runtime.
Steps to delete remotes, reset features, or reset Virtual Tach.
Accessing and understanding stored trigger event history.
Addresses problems with shock sensor, door triggers, and progressive triggers.
Solves issues with passive arming and reversed door lock outputs.
Diagnoses issues when the remote start does not activate.
Addresses starter not engaging or vehicle dying after starting.
Solves problems where the starter motor does not disengage.
Troubleshoots Manual Transmission Start (MTS) mode failures and exits.
