To Next PageTo Next Page
Need help?Do you have a question about the Directed Electronics Viper 4104 and is the answer not in the manual?
General| Brand | Directed Electronics |
|---|---|
| Model | Viper 4104 |
| Category | Car security |
| Language | English |
Emphasizes professional installation, proper ventilation, and correct tool usage during installation.
Details safe vehicle operation, avoiding starting in gear and ensuring neutral safety checks.
Highlights specific risks and precautions for manual transmission vehicle installations.
Describes the Control Center unit, its status LED, and various connection ports.
Illustrates the main harness connections including 8-pin, 6-pin, and 24-pin connectors.
Lists and explains the function of each wire in the Main Harness (H1).
Lists and explains the function of each wire in the Auxiliary/Shutdown Harness (H2).
Explains the wiring for the 8-pin Remote Start (H3) and 3-pin Door Lock connectors.
Steps to initialize and program the Virtual Tach feature for engine checking.
Describes how to learn the vehicle's tachometer signal for proper engine monitoring.
Details the function and connection of the neutral safety switch.
Step-by-step guide for testing the neutral safety switch functionality.
Explains how to use LED flash codes to diagnose remote start shutdown issues.
Interprets parking light flashes to identify remote start no-start causes.
Step-by-step instructions for pairing a new remote control to the system.
Configures system locking modes, panic activation, and horn honk duration.
Manages ignition-controlled door locking and door lock pulse configurations.
Sets comfort closure functionality and hood/door switch types (normally open/closed).
Details the duration settings (0.8s, 3.5s, 0.4s) for door lock outputs.
Explains options for second unlock timing after ignition control.
Describes the two comfort closure options and their timings.
Settings for one-time bypass, alarm override pulse count, and dome light control.
Manages door open error chirp and OEM alarm disarm output configurations.
Details output types for auxiliary channels, including duration and latching.
Explains how to link auxiliary outputs to lock, unlock, or remote start commands.
Describes SmartKey Control linking for Aux 3, affecting remote start shutdown.
Configures transmission mode and engine checking methods (Virtual Tach, Voltage, Tachometer).
Defines starter cranking time and remote start runtime duration.
Sets activation pulse count, turbo mode, flex relay functions, and diesel start delay.
Manages accessory power and status output behavior during diesel start delay.
Sets parking light flash patterns and anti-grind protection settings.
Adjusts tach mode starter release and enables vehicle temp auto report.
Configures display icons and timed output durations for auxiliary channels.
Adjusts diesel start delay timer and timer mode runtime/starts/intervals.
Sets smart start thresholds and fine-tunes starter release timing.
Provides details on the functionality of 1-way remote controls.
Erases remotes and resets system features to factory defaults.
Deletes all previously learned Virtual Tach values for re-initialization.
Troubleshoots auto re-locking failures and reversed door lock/unlock outputs.
Checks remote, neutral safety, and starter engagement problems.
Diagnoses immediate shutoff or continuous starter crank.
Diagnoses short vehicle run duration and climate control system malfunctions.
Lists common checks for manual transmission start (MTS) failures.
Identifies reasons why the MTS mode might exit prematurely.
