I
.Determining Coordinates ~
I--l r -:0-1 for Aiming Antenna
The coordinates (Azimuth, Elevation and 1ilt numbers) are
based on your ZIP code and can be determined easily by using
your receiver. You will need these numbers for site survey and
antenna adjustments.
NOTE: The antenna does not need to be installed for this step.
Connect your receiver to the TV
Consulting your receiver manual, connect the receiver's video
or Channel 3/4 outputs to the corresponding TV input. Turn on
--the TV and the receiver.
~Io ==== I~
~ ~ Set the antenna type
Navigate to the antenna installation screen menu. Select
Depending on your receiver installation as an "oval 3-sat" (some receiver brands may call
~odel,yourdisplaymaylcx:k it: "tri ple" "3 sat location" ."Sat 123" or "Sat ABC").
different from shown. In this ' " , , ,
example, a Southern California Find your coordinates
ZIP code "92683" is entered. ..
and receiver outputs: Navigate to the antenna-pointing menu screen. Enter your ZIP
.Azimuth: 152 code, then write down the numbers in space provided below.
.Elevation: 50
.lilt: 102
: ; ~~S(-!
Azimuth
(horizontal, side-side) \~==~/ Your Azimuth
Elevation //---~"\
(vertical, up/down) Your Elevation
I-;=~==:::\
lilt Your lilt
(dish reflector rotation)
0
To Next Page
Loading...
