DirecTV PLUS DVR - Page 111

Chapter 1
Chapter 2 Chapter 3 Chapter 4 Chapter 5
CHAPTER 4 - Troubleshooting
111
Solution:
- Check your To Do List to see if there are other scheduled recordings. (Press MENU, select “Manage Recordings”, then “To Do
list.”)
- Check your TV owner’s manual to turn off the TV’s timer.
Solution:
Problem: Blank screen
There is nothing on your TV screen.
Possible Causes:
- Your TV and/or your receiver are not powered on.
- Your receiver may be hooked up to the TV incorrectly.
- You may be on the wrong video source for your DIRECTV
®
Receiver.
- You may be tuned to a channel that is not currently broadcasting, or that you don’t subscribe to.
- Check that DIRECTV Plus
®
DVR and TV are both powered on.
- Read Chapter 3, “Connections for TV and Auxiliary Equipment” for instructions about connecting your receiver.
- Press the INPUT button on the TV remote control to change video source.
- Try another channel and see if you have live video.
- Press the POWER button on the front panel of the DIRECTV
®
Receiver.
- Press the red RESET button behind the door on the front panel of the receiver.
DIRECTV
®
Receiver or TV Problems