145
1. SATELLITE IN 1 (SWM-2) – Connect one line from your satellite dish here. A Single Wire Multi-Switch (SWM) connection, if
applicable, is made to this satellite in port.
2. SATELLITE IN 2 – Connect the second line from your satellite dish here.
3. OFF AIR IN – Connect a standard TV antenna or cable feed to the DIRECTV Receiver using this jack.
4. USB – For future use. USB 2.0 Host(FRONT/REAR EACH 5V = 500mA)
5. S-VIDEO OUT – A Standard-Definition video output.
6. DIGITAL AUDIO OUT OPTICAL – Use this digital audio connection for sound.
7. RCA-Audio/Video Jacks – Standard-Definition output. You can use the entire row of RCA connectors (yellow, white and red) to feed
a VCR or DVD player/burner.
8. PHONE JACK – Connect your phone line here to enable Pay Per View purchasing and Caller ID (if your phone service package
includes it).
9. POWER – Your receiver must be plugged in at all times to function properly.
Appendix 1: Receivers Front and Back Panels
To Next Page
Loading...
