DirecTV PLUS DVR - Page 94

DIRECTV PLUS
®
DVR USER GUIDE
94
Parental, Fav’s & Setup - System Setup
Select “Receiver Mode” if you want to use one remote to command a second
DIRECTV
®
Receiver.
Use this option to setup your remote to control 3 or more receivers in one room.
Certain remote control models feature RF (radio frequency) capability. Refer
to the model number printed on the top left corner of your DIRECTV Remote
Control. Look for the letter(s) “R” or “RB” are at the end of the model number
which indicates that the remote supports radio frequency.
If you have a remote with RF capability you can change the remote’s signal from
Infrared (IR) to RF. While the IR signal requires a clear line of sight to the front
of the receiver, RF signals let you put your receiver inside a cabinet or behind
solid doors and still be able to command it from up to 200 feet away.
-Receiver Mode
-Advanced Setups
-IR/RF Setup
Note: Not all DIRECTV Receivers are RF-capable.