DirecTV RC65 How To Do

6 ©2013, SolidSignal.com Reproduction is permitted provided copyright information is intact.
Even more advanced...
You can actually control a total of 8 different receivers in the same rack by using two
remotes. Set the fourth through eighth receivers to be Receiver 4 through Receiver
8 on the menu, then use codes 00005, 00006, 00007, and 00008 to set the second
remote up.
If you have nine receivers you can use an RF remote and set that ninth receiver up
to use RF.
Once you have all of this completed, you can throw away the aluminum foil you might
have been using to cover the receivers. Just don’t forget, if you’re using multiple
remotes, label them so you know which one you’re using!
Setting up one remote to control four receivers is easy,
and now... you know how to do it!

DirecTV RC65 Specifications

General

Brand	DirecTV
Model	RC65
Category	Remote Control
Language	English