3) Select Settings.
4) Select Setup, then Info & Test.
5) Use arrow keys to highlight the System Test tab, then press SELECT on Run Test.
6) If your system does not pass the system test, check any of these potential trouble areas: cabling, pointing the
satellite dish, phone connection and access card.
7) If you continue to have problems, call DIRECTV Customer Service at 1-800-DIRECTV.
You should run a system test several times before concluding that there is a problem. Occasional fluctuations in the
phone line or satellite signal can give temporary false readings.
Troubleshooting
Other Information
40
D12_MUG.indb 40D12_MUG.indb 40 11/1/06 5:52:30 PM11/1/06 5:52:30 PM
To Next Page
Loading...
