Dirt Devil BREEZE M088150 - Vacuum Cleaner Assembly Guide; Connecting Body to Nozzle; Attaching the Handle to the Body

TOOL REQUIRED: PHILLIPS OR FLAT HEAD SCREWDRIVER
Assemble the body to the
baseso that the lower hose
is on the right side.
To secure, insert one (1)
screw into the back of the
cleaner, above the onloff
switch,
Pushback dirt window flap.
Align tabs on cleardirt pas-
sagewindow with the slots
on thelower hosecuff, Push
and turn to lock into place
(inset).
Align ToolCaddyholes with Insert two (2) screws into
holeson handle, the holes and tighten until
secure,
Place upper handle onto Push upper handle down
upright, onto upright.
Insert one (1) screw (sup-
plied) into the back of the
cleanerto securehandle.