Why my Dirt Devil FD50100 won’t turn on?
If your Dirt Devil Vacuum Cleaner won’t run, there are several possible causes: 1. The power cord might not be firmly plugged into the outlet. Ensure it is securely plugged in. 2. A fuse might have blown, or a breaker might have tripped. Check the fuse or breaker in your home and replace the fuse or reset the breaker as needed.
How to improve suction on my Dirt Devil FD50100?
If your Dirt Devil Vacuum Cleaner has low suction or won’t pick up, here are a few things to check: 1. Make sure the Dirty Water Tank Lid is installed correctly. 2. Ensure the Dirty Water Tank is properly placed in the base of the cleaner. 3. Empty the Dirty Water Tank if it's full. 4. Clean the Dirty Water Tank if the dirty water passage is clogged. 5. Clean the foam filter if it's dirty.
What to do if my Dirt Devil FD50100 is leaking water?
If water is escaping from your Dirt Devil Vacuum Cleaner, consider the following: 1. The Dirty Water Tank might be full. Empty it. 2. The Dirty Water Tank might not be installed correctly. Ensure it's properly placed in the base of the cleaner. 3. The Clean Water Solution Tank might not be installed properly. Review the Clean Water Solution Tank installation.
What does it mean if my Dirt Devil Vacuum Cleaner motor sounds high-pitched?
A high-pitched motor noise in your Dirt Devil Vacuum Cleaner indicates that the float in the Dirty Water Tank has been activated.
General| Brand | Dirt Devil |
|---|---|
| Model | FD50100 |
| Category | Vacuum Cleaner |
| Language | English |
Register your product online or by phone for warranty service.
Information on locating and purchasing genuine replacement parts for the product.
Essential warnings to reduce risk of fire, electric shock, or injury during appliance use.
Specific rules on operation, children, liquids, and proper handling of the carpet washer.
Instructions and warnings for proper grounding to prevent electric shock.
Cautions on avoiding damage to the appliance and floors, especially from improper use.
Step-by-step guide for assembling the carpet washer and preparing it for use.
Instructions on using the cleaner, spraying solution, extracting water, and rinsing.
Steps for vacuuming and protecting furniture before starting the cleaning process.
Guidance on carpet drying, furniture placement, and cleaning the dirty water tank.
How to remove, refill, and replace the clean water solution tank.
Steps for emptying, cleaning, and correctly placing the dirty water tank.
Instructions for safely removing the brushroll for maintenance or replacement.
Instructions on how to replace the drive belt for the brushroll.
A checklist to diagnose and resolve issues like no power or low suction.
A guide listing approved cleaning solutions for the Dirt Devil carpet washer.
Information on how to submit a warranty claim and what is covered or excluded.
To Next Page