WARNING: TO REDUCE RISK OF PERSONAL INJURY
-
UNPLUG CLEANER BEFORE SERVICING
-
Cleaner won't
run
Cleaner won't
pick-up or low
suction
Dust escaping
from cleaner
Cleaner tools
won't pick-up
plugged into outlet.
fuseheset breaker.
3. Needs service. 3. Take to service center or call
1. Dirt container not installed
correctly.
2.
Dirt container full.
3. Brushroll worn.
4.
Broken or worn belt.
5. Clogged filter.
6.
Nozzleldirt passage hose
clogged.
4.
Thermal Protector activated.
1. Review dirt container removal and
replacement
-
Pg.
9.
2. Empty dirt container
-
Pg.
9.
3. Replace brushroll
-
Pg. 10.
4. Replace belt
-
Pg. 10.
5. Remove filter and clean
-
Pg.
9.
6.
Remove lower hose; remove obstru-
ction
-
Pg.
7.
1-800-321-1 134.
4.
~llow cleaner to cool
-
Pg. 3.
1. Dirt container full.
correctly.
4. Filter not installed 4. Review filter Removal and
I
ANY OTHER SERVICING SHOULD BE DONE BY AN
AUTHORIZED SERVICE REPRESENTATIVE
1.
Hose clogged.
2.
Dirt container full.
3. Filter clogged.
CUSTOMER SERVICE
(1
-800-32
1
-1
1
34)
In the event that further assistance is required, see your Yellow Pages for an authorized RoyalQ
1.
Remove hose and tools; remove
obstruction
-
Pg.
7.
2. Empty dirt container
-
Pg.
9.
3. Clean filter
-
Pg.
9.
Dealer. Costs of any transportation to and from any-place of repairare to be paid by the owner.
The service parts used in this unit are easily replaced and readily available from an authorized
Royal' Dealer or retailer. Always identify your cleaner by the model number and manufacturing
code when requesting information or ordering replacement parts. (The model number appears
on the bottom of the cleaner.)
To Previous Page
Loading...
