Assemble the body to the
To secure, insert one (1)
Push back dirt window flap.
base so that the lower hose
screw into the back of the
Align tabs on clear dirt pas-
is on the right side.
cleaner, above the onloff saae window with the slots
switch.
on-the lower hose cuff. Push
and turn to lock into place
(inset).
Align Tool Caddy holes with
Insert two
(2)
screws into
holes on handle.
the holes and tighten until
secure.
Place upper handle onto
Push upper handle down
Insert one (1) screw (sup-
upright. onto upright. plied) into the back of the
cleaner to secure handle.
To Next Page
Loading...
