6
HOW TO ASSEMBLE
Push handle down onto top of
unit.
Secure handle with the 1
(one) screw supplied.
1.
2.
Turn Quick Cord Release for
easy cord removal. Plug into
an electrical outlet.
Turn cleaner on. Switch locat-
ed on the side of cleaner.
Pull hose connect port down.
Located on the front of the dirt
cup. Gently slide the hose into
hole until it clicks into place.
ATTACHMENT USAGE
Use the Flex Edge
™
to reach
into corners. Gently push
into corner and edges will
mold to the corner.
1.
2. 3.
1.
Place tools into their storage
position. (A) Hose & (B)
Upholstery tool.
3.
HOW TO OPERATE
NOTE: Make sure dirt container is in place before operating.
CORD STORAGE/
REMOVAL
To use crevice tool: remove
brush from end (2). Reattach
(2a) for dusting (store brush
on handle - see fig. 2, pg. 5).
To remove hose, push down
on door and pull the end out
of the front of cleaner.
3.
2a.
2.
A
B
To Next Page
Loading...
