WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dust container or before connecting/disconnecting the attachments.
Packing away and storage
Emptying and cleaning the dust container
Taking care of your machine
1
2
Press the On/Off Button to turn
off the vacuum. Unplug the power
plug from the power supply. Press
the Cord Rewind Button with one
hand and guide the power cable
with the other hand to ensure that
it does not whip.
For convenience, there is a
parking slot located at the rear
of the vacuum cleaner where the
floor head and extension tubes
can be attached for storage and
carrying.
Gently remove the dust container
by pressing the Dust Container
Release Button.
NOTE: The dust container should be emptied before dust and debris reaches the “MAX” line, which is indicated
on the side of the dust container.
Hold the dust container over a
rubbish bin and press the Dust
Release Button to empty the dust
container. Reinsert the dust con-
tainer into cleaner ensuring that it
clicks into place.
To Next Page
Loading...
