Dish Network Wireless Joey User Manual

SETTING UP YOUR
REPLACEMENT RECEIVER
Be sure to read these instructions before
disconnecting any cables from your original receiver.
1.
Move Cables to Your Replacement Receiver
a.
Stacking Method
Use this method if you are able to place your replacement receiver
next to your original receiver and you can access and see the back of
both receivers. One by one, disconnect each cable from your original
receiver and connect it to the same port on your replacement
receiver. Once you have connected all the cables, skip to Step 2.
Connect the
Composite
RCA cables
from the TV to
your receiver.
OR
Connect the
HDMI cable
from the TV to
your receiver.
i.
Connect the
replacement
Power adapter.
ii.
Plug your
receiver into
a wall outlet.
iii.
b.
Diagram Method
If you can't use the stacking method, disconnect the cable(s) from
the back of your original receiver and use the following diagram to
reconnect the cable(s) to your replacement receiver. Try to only
disconnect cables from your original receiver, and not from the point
where the cables connect to the TV, or other components.
DN005773
Original Receiver Replacement Receiver
Your wiring set up may be different.

Dish Network Wireless Joey Specifications

General

Brand	Dish Network
Model	Wireless Joey
Category	TV Receiver
Language	English

Summary

Move Cables to Replacement Receiver

Stacking Method for Cable Transfer

Connect cables one by one from original to replacement receiver for stacking setup.

Diagram Method for Receiver Connections

Use diagram to reconnect cables from TV to receiver if stacking is not possible.

Activate Replacement Receiver

Power On and Initiate Setup

Turn on receiver, set TV input, and press SELECT to start the setup wizard.

Wireless Connection and Installation

Connect to Wireless Joey Access Point via WPS and complete on-screen installation.

Receiver Authorization Options

Authorize receiver via online chat, mydish.com, or by calling DISH customer service.

Pack and Return Original Receiver

Prepare Original Receiver for Return

Pack receiver and power supply, apply return label, seal box, and record tracking.

Ship Original Receiver via UPS

Drop off the original receiver at a UPS location within 15 days.