Distech Controls HORYZON-C - Communications Wiring; Configuring the Device

8 / 11
ET-
S
OUTPUT
NC
C
NO
24V COM
24V A
C
/DC
Fuse
External
power
supply
Red Light Green Light
Figure9: HORYZON-C Normally Open and Normally Closed outputs used simultaneously
Communications Wiring
HORYZON-C displays are uniquely identified on the network by their MAC address. This identifier is printed on a label located on the back of the display
and on its shipping box. This MAC address is used as part of the display’s factory-default network hostname.
Configuring the Device
Any of the following methods can be used to connect to the device’s interface in order to configure it:
£ Using the Xpress
Network Utility
£ Using the device’s factory-default Hostname in the Web browser
£ Using the device’s IP address in the Web browser
Using the Xpress
Network Utility
The Xpress
Network Utility is a software application that runs on a PC that allows you to discover all Distech Controls IP devices connected to an IP net-
work’s subnetwork or Wi-Fi network and to perform a range of operations on many devices at once, such as setting the device’s Hostname and IP ad-
dress, launching EC-
gfx Program to program the device, or accessing the device’s configuration Web interface. See the Xpress Network Utility User
Guide for more information.
Xpress
Network Companion mobile app can be installed on your smartphone and it works with the QR code marked on the device and/or on the device’s
packaging which encodes the device’s MAC address and host ID. By scanning the QR code, the app records this information to which you assign a host-
name. Once the QR codes for all devices have been read in, the app‘s information is transferred to the Xpress
Network Utility where it is used to populate
the relevant data fields. See the Xpress
Network Companion User Guide for more information.
Figure10: Typical QR Code