12 1030/1230 - CONTROLS
CONTROL CONSOLE DESCRIPTIONS
12 1030/1230 - CONTROLS
CONTROL CONSOLE DESCRIPTIONS
Throttle (Black)
This lever controls engine speed.
Increasing engine speed also
increases digging chain speed.
• Push down to speed engine.
• Pull up to slow engine.
Power Switch
This two-position switch controls power to the machine.
• Turn clockwise to turn power on. In this position, engine will
start when rope start is pulled.
• Turn counterclockwise to stop engine.
ic0128h.eps
Throttle (Black)
This lever controls engine speed.
Increasing engine speed also
increases digging chain speed.
• Push down to speed engine.
• Pull up to slow engine.
Power Switch
This two-position switch controls power to the machine.
• Turn clockwise to turn power on. In this position, engine will
start when rope start is pulled.
• Turn counterclockwise to stop engine.
ic0128h.eps
To Next Page
Loading...
