Ditch Witch 750 Tracker - Page 14

14 750/752 Tracker - CONTROLS
DISPLAY
14 750/752 Tracker - CONTROLS
DISPLAY
Signal Strength
Signal strength is shown graphically on bars at top of display and
in numeric display. It can be displayed two ways: building from
both sides into the middle (a) or building from left to right (b). To
change signal strength display, turn unit off. Then press and hold
depth button while turning unit on.
Gain
Gain (amount of signal amplification) is shown on bars below
signal strength indicator. Gain increases to the right.
Signal Strength
Signal strength is shown graphically on bars at top of display and
in numeric display. It can be displayed two ways: building from
both sides into the middle (a) or building from left to right (b). To
change signal strength display, turn unit off. Then press and hold
depth button while turning unit on.
Gain
Gain (amount of signal amplification) is shown on bars below
signal strength indicator. Gain increases to the right.