Controls - 22 830R/T Operator’s Manual
830R Receiver
CMW
Menu
• Press and hold Menu key to enter menu.
• Use Up Arrow and Down Arrow keys to cycle through menu options. Press Menu key to select.
• Press On/Off key from menu screen to return to locating screen.
Units
Cycle through depth measurement units with Up Arrow and Down Arrow keys.
Press Menu key to select units and return to locating screen. Press On/Off key to
return to the menu screen.
Contrast
Adjust display contrast with Up Arrow and Down Arrow keys. Press Menu key to
save change and return to locating screen or On/Off key to return to menu screen.
Power Setup
Select power frequencies for unit to cycle through in power mode with Up Arrow
and Down Arrow keys. Press Menu key to check or uncheck highlighted frequency.
Unit will skip unchecked frequencies when in power mode. Press On/Off key to
return to menu screen without making changes.
Info
View system information. Press Up Arrow or Down Arrow keys to scroll through
screens. Press On/Off key to return to menu screen.
Available Information
• serial number
• software part number and revision level
• date calibrated
• battery voltage
• total run time
c00ic106t.eps
c00ic107t.eps
c00ic108t.eps
c00ic109t.eps
To Next Page
Loading...
Need help?
General