Controls - 18 SK500 Operator’s Manual
CMW
3. Ignition switch To start engine, insert key and
turn clockwise.
To stop engine, turn key
counterclockwise.
IMPORTANT: If engine does not start
or stalls, turn key to STOP and then
restart.
4. Fuel gauge Displays fuel level in tank. Use only unleaded gasoline.
Tank holds 6 gal (23 L).
5. Hourmeter Displays engine operating
time.
Use these times to schedule service.
6. Engine oil pressure
indicator
Lights when engine oil
pressure is low.
Also lights briefly when
engine is started.
Engine will stop.
1. Check oil level.
2. Check for leaks before starting
engine.
Item Description Notes
To Next Page
Loading...