Controls - 40 SK600 Operator’s Manual
Operator Station
5. Lift arm control To move lift arms down,
push.
To float, push to end.
To move lift arms up, pull.
To curl attachment up, move
left.
To curl attachment down,
move right.
6. Attachment drive control To engage attachment drive
in reverse, push.
To engage in forward, pull.
Use attachment drive foot control to
hold in engaged position when hands
are busy operating other controls.
See “Hydraulic fluid bypass” on
page 34 for instructions on operating
attachment drive control at low flow.
7. Attachment drive foot
control
To hold attachment drive
control in forward or reverse,
lift lever lock, move lever in
desired direction, and press
pedal.
Use when hands are needed to
operate other controls.
Item Description IMPORTANT
To Next Page
Loading...
