Controls - 22 SK650 Operator’s Manual
Gauges and Indicators
CMW
2. Glow plug button To help start cold engine, turn
ignition switch to first position.
Press glow plug button as
directed in notes.
Release button, then turn
ignition switch all the way
clockwise to start.
IMPORTANT: Press glow plug button
according to temperatures below.
• If ambient temperature is below
40° F (4° C), press and hold
button for 5 seconds.
• If ambient temperature is below
20° F (-7° C), press and hold
button for 10 seconds.
• Do not press button for more than
20 seconds continuously.
3. Hourmeter Displays engine operating
time.
Use these times to schedule service.
4. Hydraulic fluid sight
glass
Shows level of hydraulic fluid
in tank. Maintain fluid at
halfway point on glass.
5. Coolant temperature
gauge
Displays coolant temperature. IMPORTANT: If temperature goes
above 230°F (110°C):
1. Stop operation, set throttle to low
idle, and allow engine to cool.
2. Stop engine.
3. Check coolant level.
4. Ensure radiator is clean.
6. Ignition switch To start engine, insert key and
turn clockwise.
To stop engine, turn key
counterclockwise.
IMPORTANT:
• If engine does not start or stalls,
turn key to STOP and then
restart.
• Do not allow starter motor to run
continuously for more than 20
seconds.
Item Description Notes
c00ic108h.eps
To Next Page
Loading...
