Service - 62 SK650 Operator’s Manual
100 Hour
CMW
100 Hour
Clean Fuel Filter Element
Use kerosene to rinse the filter cup and filter
element every 100 hours. Bleed the fuel system
after cleaning the filter.
See Kubota engine operator’s manual for more
information on cleaning the fuel filter.
Check Fan Belt for Tension and
Damage
Check belt tension every 100 hours. Belt is
properly tensioned when it moves about 1/4-3/8”
(7-9 mm) when pushed at the long span. Replace
the belt when it is worn and sinks into the pulley
groove.
Adjust Tension
1. Loosen two alternator bolts (shown).
2. Adjust position as needed.
3. Tighten bolts.
4. Check tension.
Location Task Notes
Traction Unit Clean fuel filter element
Check fan belt tension and damage 1/4-1/3” (7-9 mm)
Lubricate parking brake MPG
Check battery electrolyte level
To Next Page
Loading...
