SK650 Operator’s Manual Service - 53
Precautions
CMW
Jump Starting Precaution
Welding Precaution
Explosion possible. Serious injury or equipment damage could occur.
Follow directions carefully.
NOTICE:
• Sparks can cause battery to explode.
• Electronic components can be easily damaged.
• Jump starting is not recommended except in extreme circumstances. Follow procedures on
page 69 if jump starting is necessary.
Explosion possible. Serious injury or equipment damage could occur.
Follow directions carefully.
NOTICE:
• Disconnect battery to prevent damage to battery. Do not turn off battery disconnect switch
with engine running, or alternator and other electronic devices may be damaged.
• Connect welder ground clamp close to welding point and make sure no electronic
components are in the ground path.
• Always disconnect the Engine Control Unit ground connection from the frame, harness
connections to the ECU, and other electronic components prior to welding on machine or
attachments.
To Next Page
Loading...
