Specifications - 74 SK650 Operator’s Manual
Basic Unit
CMW
Bucket width, max 44 in 1.1 m
Bucket width, min 36 in 914 mm
W Track width, max 42 in 1.1 m
Track width, min 36 in 914 mm
Loader width, excluding tracks 35 in 889 mm
Swing radius, max, with 44” bucket 60 in 1.5 m
Swing radius, no attachment 47 in 1.2 m
Rear overhang, max 25 in 635 mm
Performance U.S. Metric
Ground drive speed, forward 4 mph 6.4 km/h
Ground drive speed, reverse 4 mph 6.4 km/h
Ground pressure, 7” (180-mm) tracks * 5.8 psi 0.4 bar
Ground pressure, 9” (230-mm) tracks * 4.5 psi 0.31 bar
Tipping capacity
The rated operating capacity for this machine was determined using a standard bucket in
the drive position with center of gravity 7 in (18 cm) from the mounting plate. Depending
on the attachment, the actual operating capacity of the attachment may vary.
1860 lb 844 kg
Operating capacity (35% of tipping capacity) 650 lb 295 kg
Machine weight (no attachment, fluids full) 2630 lb 1195 kg
* Includes machine weight, 175-lb (80-kg) bucket, 165-lb (75-kg) operator and 650-lb (295-kg) load in bucket.
Hydraulic System U.S. Metric
Auxiliary: double gear pump
Flow rate (pump 1) 8 gpm 30 L/min
Flow rate (pump 2) 5.5 gpm 21 L/min
Pressure 3000 psi 172 bar
Ground drive: dual hydrostat
Flow rate 16.5 gpm 62 L/min
Pressure 2500 psi 172 bar
Dimensions U.S. Metric
To Next Page
Loading...
