Controls - 40 SK900 Operator’s Manual
Operator Station
5. Throttle To increase engine speed,
press up.
To decrease, press down.
Increasing engine speed also
increases attachment speed.
6. Lift arm control To move lift arms down,
push.
To float, push to end.
To move lift arms up, pull.
To curl attachment up, move
left.
To curl attachment down,
move right.
7. Attachment drive control To engage attachment drive
in reverse, push.
To engage in forward, pull.
Use attachment drive foot control to
hold in engaged position when hands
are busy operating other controls.
8. Attachment drive foot
control
To hold attachment drive
control in forward or reverse,
lift lever lock, move lever in
desired direction, and press
pedal.
Use when hands are needed to
operate other controls.
Item Description IMPORTANT
To Next Page
Loading...
