Need help?Do you have a question about the Ditch Witch ST37x and is the answer not in the manual?
General| Brand | Ditch Witch |
|---|---|
| Model | ST37x |
| Category | Construction Equipment |
| Language | English |
Record serial numbers and date of purchase in spaces provided.
The ST37x is a platform, rubber track trencher designed for light-to medium-duty construction.
Identifies and describes the main parts of the machine.
General safety rules and best practices before operating the equipment.
Steps to take in case of specific emergencies like electric strikes or fires.
Explains the meaning of DANGER, WARNING, CAUTION, NOTICE, and IMPORTANT signals.
Identifies and explains safety decals and warnings on the machine.
Describes the various gauges and indicators on the machine.
Detailed explanation of indicators and controls on the machine's graphic display.
Information on how to navigate and use the service interval screen.
Identifies and explains the function of various machine controls and switches.
Location of the battery disconnect switch within the engine compartment.
Steps for collecting essential information before starting a job.
Identifying hazards and classifying jobsite based on underground utilities and terrain.
Guidance on checking necessary supplies and preparing the equipment for use.
Instructions for mounting required accessories like fire extinguishers.
Procedures for safely starting and stopping the machine.
Basic operational procedures for driving the unit.
Guidelines for operating the machine safely on inclines.
Instructions on proper lifting points and procedures for the machine.
Procedures for loading, securing, and unloading the machine for transport.
Procedures for towing or retrieving a broken-down unit.
Preparing the machine and adjusting the trenching boom position.
Detailed procedure for performing trenching operations.
Instructions for cleaning the machine and storing tools after use.
Safety precautions, recommended lubricants, and service key.
Engine oil temperature chart, approved coolant, and approved fuel requirements.
Explanation of the DPF system and exhaust cleaning procedures.
Maintenance tasks for startup and every 10 hours.
Maintenance tasks to be performed every 50 hours.
Maintenance tasks to be performed every 250 hours.
Maintenance tasks to be performed every 500 hours.
Maintenance tasks to be performed every 1000 hours.
Maintenance tasks to be performed as needed.
Detailed dimensional specifications of the machine.
Engine details and performance metrics like speed and pressure.
Specifications for hydraulic system and fluid requirements.
Specifies noise and vibration levels during operation.
How to get support, publications, and training.
Details the terms, conditions, and exclusions of the equipment warranty.
To Next Page
